Model name:
Content of Instruction Manual
Before Use ...................................... Precautions, disclaimer, etc.
Operating the Printer ......................Procedures for printing cards
Replacement ........... Procedures for replacing consumable items
Maintenance ................................................Cleaning procedures
Troubleshooting ................... Actions to take when troubles occur
Setup ....................................................... Installation, connection
o
0
0
0
0
0
0
CD-ROM Content
Instruction Manual
o
•
Getting started guide
LST0995-001H
Accessories
CD-ROM ................................................................................1
Getting started guide ..............................................................1
READ ME FIRST (LST1013) .................................................1
Power Cord (2 m) ...................................................................2
Cleaning Card ........................................................................1
Card Stacker ..........................................................................1
USB 2.0 Cable (2m) ...............................................................1
Gloves ....................................................................................1
Tweezers ................................................................................1
o
0
0
0
0
0
0
0
0
0
Products sold separately
To purchase these items, consult our authorized dealers.
Use the retransfer film or ink ribbon within half a year after purchase.
Ink Ribbon (YMCK), 1,000 frames/roll (Model: DIC10216)
Ink Ribbon (YMCKK), 750 frames/roll (Model: DIC10217)
Ink Ribbon (YMCK-PO), 750 frames/roll (Model: DIC10218)
Ink Ribbon (YMCK-UV), 750 frames/roll (Model: DIC10313)
ART Retransfer Film, 1,000 frames/roll (Model: DIC10319)
Cleaning Kit (Model: DIK10044)
Set incl. 10 print head cleaning swabs, 10 cleaning tissues for
rollers and 10 special cleaning cards
Magnetic Stripe Encoder Head Cleaning Cards (Model: DIC10311)
Box of 10 cards
o
•
•
•
•
•
•
•
Thank you for purchasing this product.
Please read through the “Instruction Manual” in the CD-ROM carefully in advance to ensure proper use of this product.
Also, to make sure that the product is used safely, please read through the “Safety Precautions” in the “READ ME FIRST”
booklet. Please store the manuals properly after reading so that they can be referred to whenever necessary.
Place this “Getting started guide” near the printer and use it as and when needed.
Specifications
Operating environment conditions
Temperature: 15 °C to 30 °C
(When peel-off ink, UV ink is used: 17 °C to 28 °C)
Humidity: 35 % to 70 % No condensation
(When peel-off ink, UV ink is used: 35 % to 60 %)
Storage environment conditions
<Printer unit>
Temperature : -15
°C to
55
°C
Humidity : 20 % to 80 %
<Printing media (retransfer film or ink ribbon) / card>
Temperature : 5
°C
to 25
°C
Humidity : 40 % to 60 %
Power supply ........................................AC 100 V - 120 V,
50 Hz/60 Hz
AC 220 V - 240 V,
50 Hz/60 Hz
Power consumption ........................................................... 310 W
(maximum power when all options are installed)
Current consumption ...................................3.5 A (100 V system)
1.6 A (200 V system)
Mass .....................................................................approx. 14.4 kg
(single-sided printer, excluding optional built-in items)
Dimensions ............... 343 mm x 411 mm x 322 mm (W x H x D)
o
0
0
0
0
0
0
0
* The specifications and appearance of this product may be modified
for improvement without prior notice.
X ID 8300
Function Option
Single-sided
Printing
Double-sided
Printing
Bend Remedy unit Magnetic Encoder
Contact IC
Encoder
Non-contact IC
Encoder
Function & Option Checklist
Use the checklist below to identify the functions and options of the printer in use. Tick accordingly.
o
To Next Page
Need help?
General