Need help?Do you have a question about the Matrix Fitness A7xE-04 Ascent Trainer and is the answer not in the manual?
General| Brand | Matrix Fitness |
|---|---|
| Max User Weight | 400 lbs |
| Power Requirements | Self-Powered |
| Weight Capacity | 400 lbs |
| Model | A7xE-04 |
| Heart Rate Monitoring | Contact |
Locates the serial number on the Ascent Trainer unit and console.
Provides essential safety precautions for operating the Ascent Trainer and general electrical safety.
Details specific electrical requirements, grounding, and power supply for the Ascent Trainer.
Outlines daily, weekly, and monthly cleaning procedures for the Ascent Trainer.
Advises on inspecting equipment for worn or broken parts and using approved replacements.
Provides detailed instructions for daily, quarterly, and yearly maintenance tasks.
Explains how to properly clean and care for the touch screen display.
Guides users through the auto calibration process after installation or incline motor replacement.
Describes the console interface, including the touch screen and entertainment zone functions.
Details how to set up various workout programs and explains the available workout types.
Introduces the Manager Mode for customizing Ascent Trainer settings for a club.
Details the 'About' tab in Manager Mode, displaying serial number and software versions.
Explains settings for maximum workout time, default time, and pause time in Manager Mode.
Covers default settings for program level, user age, weight, gender, and keypad sound.
Manages default TV channel, volume, tuner availability, and remote TV functions.
Allows selection of default language and unit settings for the console display.
Configures Asset Management and Virtual Active features within Manager Mode.
Introduces Engineering Mode for tracking technical settings and error history.
Manages auto calibration and sets RPM low limits and default incline.
Displays workout history and statistics for the Ascent Trainer.
Shows the error code history of the Ascent Trainer.
Allows selection of a screen header from a list for club customization.
Records the Club ID of the fitness facility.
Sets maximum and minimum incline end points for incline motors.
Configures the ErP Time for console LEDs to turn off after inactivity.
Provides an overview of Service Mode for testing and storing information on the Ascent Trainer.
Selects the current machine type and displays serial number, distance, and time.
Performs tests on the keypad, touch calibration, keypad type, and radio signal.
Allows recording of key components replacement history.
Sets the current date and time for the machine.
Presents detailed electrical diagrams for the Ascent Trainer.
Lists and describes the functions of the LED indicators on the Lower Control Board (LCB).
Illustrates the wiring connections for the Lower Control Board (LCB).
Addresses the symptom and solution for Error Code 04A0 (PCB communication disconnected).
Addresses the symptom and solution for Error Code 04B0 (LCB communication disconnected).
Addresses Error Codes 0140 and 014D related to PCB communication and incline actions.
Addresses Error Code 01A1 for incline calibration errors.
Addresses Error Code 0147 related to incline motor disconnection.
Addresses Error Code 0148 for incline motor over current.
Addresses Error Code 0149 for resistance current issues.
Addresses Error Code 01B4 for battery terminal reversal or circuit errors.
Addresses Error Code 02AB for machine type mismatch.
Addresses Error Code 02B4 for resistance type errors.
Addresses Error Code 0248 for battery disconnection or failure.
Addresses Error Codes 014A and 0247 for LCB charge circuit or failure.
Guides troubleshooting for issues with no resistance during workouts.
Provides solutions for the console not receiving power.
Addresses problems with the heart rate function not working or reading incorrectly.
Introduces troubleshooting for TV and entertainment features on the Ascent Trainer.
Provides steps to resolve fuzzy or unclear TV picture issues.
Offers solutions for when the integrated TV will not turn on.
Addresses issues with the entertainment keypad not responding.
Step-by-step instructions for replacing the front disk of the Ascent Trainer.
Detailed guide for removing and replacing the front shroud assembly.
Instructions for replacing the Lower Control Board (LCB).
Steps for removing and installing a new generator.
Procedure for replacing the generator belt.
Instructions on how to replace the drive belt.
Guide for replacing the pulley axle set.
Step-by-step instructions for replacing the drive axle set.
Procedure for removing and installing a new crank.
Instructions for replacing the entire console unit.
Guide for replacing the console keypad or overlay.
Steps for replacing the handlebar assembly attached to the console mast.
Detailed procedure for replacing the incline motor.
Instructions for replacing the dual action handlebar.
Guide for removing and installing new foot pedals.
Steps for replacing the pedal arm.
Procedure for replacing the link arm.
Instructions for replacing the swing arm.
Guide for replacing the vertical stabilizer arm.
Steps for removing and installing the incline arm cover.
Instructions for servicing components on the handlebar, like buttons and grips.
Post-installation and post-repair testing procedures for the Ascent Trainer.
Provides detailed specifications for the Ascent Trainer model A7XE.
Lists and describes the hardware components used for assembly.
Provides step-by-step visual instructions for assembling the Ascent Trainer.
Guides on leveling the Ascent Trainer using adjustable frame levelers.
Instructions for programming the integrated TV channels and settings.
Step-by-step guide for updating the Ascent Trainer's software via USB.
To Next Page
