Need help?Do you have a question about the MATRIX TECHNOLOGY MPM-1010 and is the answer not in the manual?
General| Brand | MATRIX TECHNOLOGY |
|---|---|
| Model | MPM-1010 |
| Category | Measuring Instruments |
| Language | English |
Lists key features of the MPM-1010/1010B Digital Power Meter, including display, testing capabilities, and accuracy.
Illustrates the block diagram showing the analog and digital parts of the instrument.
Explains voltage and current signal processing, including A/D conversion, calculation of URMS, IRMS, and Ip.
Details the measurement ranges and intrinsic error for voltage, current, power, and power factor.
Specifies power source requirements, external dimensions, and weight of the instrument.
Describes the layout and function of the front panel controls and display.
Details the connectivity ports and switches located on the back panel.
Explains how to connect the instrument and wire the measurement setup, including safety precautions.
Illustrates the basic measurement principle using a diagram.
Describes the procedure for powering on the instrument and initiating measurements.
Describes the function of keys like SETUP and ↑/LOCK used during sorting setup.
Details the step-by-step process for setting sorting parameters for current, power, and PF.
Specifies the recommended temperature and relative humidity for instrument operation.
Details the required voltage and frequency for the instrument's power source.
Warns against using the instrument in environments with combustibles and explosives for safety.
Outlines what the warranty covers, its duration (3 years), and who is covered.
Provides contact details for service, required information for repairs, and contact methods.
To Next Page