Need help?Do you have a question about the Matrix Brax and is the answer not in the manual?
Correct placement and alignment are crucial for optimal sound quality and phase accuracy.
Remove plexiglass covers with the provided tool for connections and adjustments.
Jumper J1 adjusts the crossover for 4-ohm or 2-ohm operation.
Jumpers J2 and J3 adjust mid and tweeter levels relative to the woofer.
Jumper J1 is used to set the crossover for 4-ohm or 2-ohm operation.
Jumper J2 allows individual adjustment of the tweeter level.
Jumper J4 adjusts the crossover for Bi-Amping mode for optimal signal to each speaker.
Detailed technical specifications for all BRAX Matrix system components.
Correct placement and alignment are crucial for optimal sound quality and phase accuracy.
Remove plexiglass covers with the provided tool for connections and adjustments.
Jumper J1 adjusts the crossover for 4-ohm or 2-ohm operation.
Jumpers J2 and J3 adjust mid and tweeter levels relative to the woofer.
Jumper J1 is used to set the crossover for 4-ohm or 2-ohm operation.
Jumper J2 allows individual adjustment of the tweeter level.
Jumper J4 adjusts the crossover for Bi-Amping mode for optimal signal to each speaker.
Detailed technical specifications for all BRAX Matrix system components.
General| Brand | Matrix |
|---|---|
| Model | Brax |
| Category | Speaker System |
| Language | English |
To Next Page