12
Vibration at impact drilling into
h,ID
13,768 m/s²
Uncertainty K
1,5 m/s²
concrete a
10. Repairs
11. Environmental protection
Endoflifeelectricalequipmentmustnot
be placed in household waste. Please
take it to a return point. Find out about
your nearest return point from your coun-
cil or sales outlet.
Only use accessories and spare parts
recommended by the manufacturer. If the
equipment should fail some day in spite of our
quality controls and your maintenance, only have
it repaired by an authorized electrician.
If the supply cord of the appliance is damaged,
this has to be done by the manufacturer or his
agent or electrician in order to avoid a safety
hazard.
The noise that is generated at the workplace
canexceed85db(A).
Therefore, wear ear protection
The specified value of emitted vibration was
measured according to a standard test procedure
and can be used to compare one power tool with
another.The specified value of emitted vibration can
also be used for a preliminary assessment of
interruption.
Warning:
The value of emitted vibration may differ from the
specified value during actual use of the power tool,
depending on how the power tool is being used.
To protect the operator, it is necessary to determine
safety measures based on assessment of
interruption during actual usage conditions (in this
context, all sections of the operation cycle must be
taken into consideration, for example the time
periods during which the power tool is turned off,
and the ones during which it is turned on, but runs
without any load).Other risks
Even if you operate this power tool according to
instructions, there will still be some risks. The
following may occur in connection with the
construction and design of this power tool:
1. Lung damage, if no suitable dust protection mask
is worn.
2. Hearing damage, if no suitable ear protection is
worn.
3. Health damage resulting from hand and arm
vibrations if the tool is used for a long period of time,
or is not properly controlled and serviced.
Warning! This power tool generates an
electromagnetic field during operation. Under certain
conditions this field may adversely affect active or
passive medical implants. To minimize the risk of
severe or lethal injuries, we recommend that persons
with medical implants should consult their physician
and the manufacturer of medical implants before
operating this tool.
To Next Page
Loading...