Proper horizontal adjustment of the saddle is very important in avoiding injury to the knees.
Sit on the saddle and move the pedals until the crank arms are in horizontal position.
Using your forward leg as a marker, your kneecap should be directly above the
center of the pedal so that a straight line is created between knee and center of the pedal
dismount the Matrix IC3 Indoor Cycle. Next, loosen the rear lever handle, slide the saddle
forward or backward as required, and then retighten the lever handle.
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013
|
www.indoorcycling.com ENG 10
HOW TO ADJUST THE Matrix IC3 Indoor Cycle
horizontal adjustment
with lever handle
To Next Page
Loading...
