increments by use of the resistance knob. To increase the resistance, turn the resistance
knob clockwise. To decrease the resistance, turn the knob counterclockwise.
connected to the pedal binding while riding.
HOW TO OPERATE THE Matrix IC3 Indoor Cycle
!
!
Due to the weight of the Matrix IC3 Indoor Cycle, it is recommended that two people
move it. While one person lifts the back of the Matrix IC3 Indoor Cycle, the second person
wheels. Carefully move the Indoor Cycle to the desired location and then lower it.
If the Matrix IC3 Indoor Cycle rocks on
leveling feet (see diagram) underne-
ath the front or rear stabilizer until the
rocking motion is eliminated. Im
portant: Please do not unscrew
the leveling feet more than ½ inch!
Resistance knob
Red emergency
brake handle
Leveling feet
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013
|
www.indoorcycling.com ENG 12