PREVENTATIVE MAINTENANCE
Version 1.0 2013 IC-MXIC3B-01 Copyright by Indoorcycling Group GmbH 2013
|
www.indoorcycling.com ENG 13
door cycle is not maintained as described, components may wear excessively and
1. Make sure that the Matrix IC3 Indoor Cycle is level. If the Matrix IC3 Indoor Cycle rocks
motion is eliminated (see „How to move the Matrix IC3 Indoor Cycle“ on page 12).
cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the handle-
bars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply a
small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and the lock
handles. Avoid using strong detergents on the Matrix IC3 Indoor Cycle frame.
1. Apply a small amount of the lubrication spray to a lint-free cloth. Thoroughly clean
Matrix IC3 Indoor Cycle.
2. For optimal performance of the resistance
system, and to minimize wear on the brake pad,
the
should be applied to the brake pad using the lubri-
cation holes on the plastic part of the brake pad. If
fuzz or lint appears on the brake pad, the brake pad
has become too dry. Lubricant spray should be ap-
plied more frequently. Make sure brake pad is tho-
roughly soaked from end to end with lubricant spray.
Wipe off any excess.
ENG ESP
2
To Next Page
Loading...
Need help?
General
