19
Mounting the Fascia
Door
• Using a screwdriver, fix the mounting
brackets to the appliance door, as
shown in figure 7.
• Position the appliance within the unit.
Ensure that there is a gap of 3 to 4mm
between the non-hinged side and the
cabinet wall.
• Locate the slider in the bracket and fix
the slider to the fascia door 20 to 22mm
from the edge of the fascia as shown
in figure 8, ensuring that the slider is
positioned centrally and horizontally
within the bracket. Tighten securely by
hand.
• Fill the gap on the non-hinged side with
the seal strip provided, as shown in
figure 9.
20 mm
Door gasket
x4
x4
fig. 7
fig. 8
fig. 9
To Next Page
Loading...