11
55
553
23.5
Adjacent Cabinet
Installation procedure
1. Mark the positions of the fixing holes on the wall using the
dimensions shown in Fig. 3.
2. Drill and plug the wall with appropriate fixings, suitable for the wall
type you are fixing the extractor on.
3. Mount the brackets and securely tighten.
4. Hang the hood on the brackets and adjust the brackets and
height to suit. The adjustment mechanism is shown in Fig. 4.
5. Once the hood is levelled and square against the wall, adjust the
bottom panel as required (Fig. 5).
6. Secure the extractor to the adjacent units through the holes
in the side of the product, to ensure that it cannot be
accidentally knocked off the hanging brackets.
Fig. 3
55
To Next Page
Loading...