6
3.1 USING MANAGER PREFERENCE MODE
This section allows a user to manipulate default settings for the machines.
It may be accessed by pressing the LEVEL UP/LEVEL DOWN simultaneously
for 5 seconds. To change a setting, press “ENTER” on the keypad and
use the Level buttons and numeric keypad to change the values. Pressing
“ENTER” again will save the change. Pressing “BACK” will bring you to the
previous menu. To exit manager’s mode, hold “STOP” down for 5 seconds.
Below is a list of the settings.
Maximum Time
Default Time
Default Level
Default Age
Default Weight
Accumulated Distance
Accumulated Time
SoftwareVersion
Timer Mode
Speed/DistanceMode
Out of Order
Gender
Language
Sound Mode
CHAPTER 3: U
SERIAL#
PLACEMENT
SERIAL # PLACEMENT
4.2 UNIVERSAL CONSOLE SERIAL NUMBER LOCATION
4.1 STEPPER SERIAL NUMBER LOCATION
Premium_stepper_090723.indd 6 7/23/09 10:18 AM
To Next Page
Loading...
Need help?
General