11/24 | Version 18 | Revision Date: 12/28/2021 | Revised by: EM  Matrix Xer & Xir Console 
YOUTUBE
App resets when 
resi zed o r perf orm s 
poorly
Use B row ser to 
watch YouTube.
No better solution 
exis ts
Software versio n 
1.5.3.9 removes the 
YouTube app due to 
performance issues.
PRESSREADER
PressRea der does 
not function
Software versio n 
1.5.3.9 removes the 
PressRea der app 
due to 
incompatibility.
 
If your issue persists, Click here
. 
Additional Information 
•  Any adjustments made on in-app volume controls will be overridden by the console Master 
Volume. (This is the console’s intended behavior.) The user can adjust the volume using the 
Master Volume slider that appears when they tap the Settings icon in the upper-right corner.  
•  All apps are maintained by software. If software updates don’t resolve issues, hardware failure is 
indicated. 
•  The wireless requirements to run entertainment apps are 802.11b/g/n in 2.4 GHz range, minimum 
speed 3 Mbps (5 Mbps for streaming in high definition). Ensure that the console is connected to 
the internet; there is presently no way to check download speed on an Xer or Xir console. 
•  Hulu, WeChat, and Kindle are removed from software version 1.4 and greater due to 
incompatibility with the operating system. 
•  PressReader and YouTube are removed from software version 1.5.3.9 and greater due to 
incompatibility with the operating system and poor performance. 
•  Passport USB Compatibility
 Service Bulletin 
•  It is not possible to download/add additional apps to the console. 
•  At this time, we can’t guarantee that the console’s installed Web Browser will support streaming. 
•  Apps can only be accessed after pressing “Go” or starting a workout program. It is not possible to 
open an entertainment app before starting a workout. 
•  The change the default city on the weather map, follow these steps:  
1.  Access the settings menu by touching the gear icon in the top right corner of the home 
screen.  
2.  Tap “Machine Settings”.  
3.  Tap “Weather”. 
4.  Touch and drag the map. 
5.  Double tap the location you wish to set as the default.