3
PRODUCT SPECIFICATIONS
Maximum User Weight 136 kg / 300 lbs.
Maximum Training Weight 91 kg / 200 lbs.
Product Weight 302 kg / 666 lbs.
Overall Dimensions
(L x W x H)*
150 x 119 x 130 cm /
59” x 47” x 51”
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and pas-
sage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the
ADA recommended clearance width for individuals in wheelchairs.
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment,
or any other type of adjustment mechanisms to a comfortable start position.
Make certain that the adjusting mechanism is fully engaged to prevent
unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.
PLEASE NOTE:
Be sure to remove the insulating sheet when installing the rep counter.
WARRANTY
For North America, please visit www.matrixtness.com for warranty information
along with warranty exclusions and limitations.
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Clean Upholstery * Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips * As Needed
Lubricate Guide Rods † As Needed
* Upholstery & Grips should be cleaned with a mild soap and water or a non-
ammonia based cleaner.
† Guide rods should be lubricated with Teon based lubricant. Apply the
lubricant to a cotton cloth and then apply up and down the guide rods.
To Next Page
Loading...
Need help?
General
