Matrox Iris GTX connectors 71
Liquid lens connector
The liquid lens connector is a six-pin shrouded male connector designed to
connect to the 6-pin connector from a Varioptic Caspian C-39N0-160-I2C or
C-39N0-250-I2C lens. The secondary, 3-pin male connector, from the Varioptic
lens is not used.
This connector is located inside the lens cap housing of your Matrox Iris GTX.
The pinout for the liquid lens connector is as follows:
Pin number Signal name Description
1PWR Power supply (+5 V).
2GND Ground.
3SDA Serial data line signal.
4SCL Serial data clock signal.
5 Unused Unused.
6 Unused Unused.
To Next Page
Loading...
