Matsui MFI60 - Loading the Dishwasher Racks

As the rinse aid diminishes, the size of the black dot on the rinse
aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
The u
pp
er rack is desi
g
ned to hold more delicate and li
g
hter dishware such as
g
lasses, coffee and tea cu
p
and saucers, as well
as plates, small bowls and shallow pans(as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
The upper rack can be adjusted for height by putting wheels of different height into the rails.
We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,
serving dishes and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the
top spray arm.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom rack feature fold down tine rows so that larger or more pots and pans can be loaded.
1
Cups
2
Small serving bowl
3 Large serving bowl
4
Saucers 5
6
7
Dish
Oval platter
10
Dinner plates
Side plates
9
Bowls
11
Silverware basket
1
2
3
5
7
6
1
4
4
1
Side plates
11
6