27
6. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
7. Refit the bracket fitting the bottom hinge
pin. Replace both adjustable feet.
Unscrew
Screw
8. Place the door back on. Ensure the door
is aligned horizontally and vertically
so that the seals are closed on all sides
before finally tightening the top hinge.
9. Insert the hinge bracket and screw it to
the top of the unit.
10. Use a spanner to tighten it if necessary.
MUL48W18E_IB_5L_RC_190412_grace.indb 27 12/4/2019 7:55 PM
To Next Page
Loading...
