Instructions for Matsutec AIS Configuration
1. Requirements
a. Matsutec AIS device, model HA-102
b. Computer (OS Windows）
c. Power and data cable
d. Application software HA_CONFIG.exe
2. Procedure
2.1 Connect the Matsutec AIS device with the computer.
Connect AIS RS232 port directly to the DB9 of the computer or by an adapter of
RS232-to-USB to the USB port of the computer.
Note:
When with a USB adapter, please make sure to install the USB driver of the adapter
firstly.
2.2 Power on the AIS device.
To Next Page
