To Next PageTo Next Page
Need help?Do you have a question about the Mattel Fisher-Price DKD85 and is the answer not in the manual?
Specific warnings and hazards when using the product as an infant rocker.
Specific warnings and hazards when using the product as an infant swing.
Specifies the maximum weight limit for the child using the product.
Guidelines for safe operation, including ventilation, AC adaptor, and water proximity.
Notes on cleaning, product variations, and replacement warning labels.
Identification of the primary structural parts of the swing's base and frame.
Identification of parts that make up the child's seat assembly.
Identification of included accessories and necessary hardware for assembly.
Identification of the tool provided for assembly and adjustments.
Inspect product for damage, loose parts, or sharp edges before assembly and use.
Connect the swing base to the lower swing frame, ensuring a click.
Insert and tighten M5 x 38 mm screws into the lower swing frame.
Connect swing base cover tabs and grooves, then secure with screws.
Fit the motorized frame to the lower frame, ensuring the button snaps into place.
Plug the power cord into the socket on the swing assembly.
Attach the swing power cord cover by snapping it into place.
Insert the swing arm into the main swing frame tube.
Loosen and remove the M5 x 45 mm screw from the swing arm retainer.
Insert and tighten the M5 x 45 mm bolt to secure the swing arm.
Insert the mobile into its socket and push down to secure it.
Connect the seat back to the seat base tubes and secure with screws.
Connect the seat bottom to the seat base and secure with screws.
Attach the seat side rails to the seat assembly and secure with screws.
Turn seat assembly over, attach rocker rails to the bottom and secure with screws.
Thread waist belts through the lowest slots in the seat pad.
Thread shoulder belts through lower or upper slots based on baby's size.
Attach the clips on the top of the seat pad to the seat back.
Secure the seat pad buckles on the bottom of the seat pad.
Insert restraint pad, waist, and shoulder belts into the body support slots.
Guidance on installing batteries for use away from an electrical outlet.
Open battery compartment, insert batteries, and secure the door.
Describes symptoms of low battery power and solutions.
Instructions for resetting the product's electronics if it operates erratically.
Explains risks associated with battery leakage, including chemical burns.
Steps to prevent battery leakage and ensure safe battery handling.
Information regarding compliance with Industry Canada regulations.
Place child in seat, position restraint pad between legs, and fasten belts.
Ensure the restraint system is snug against the child by tightening waist belts.
Instructions on how to tighten and loosen the child's waist belts.
Instructions on how to tighten and loosen the child's shoulder belts.
How to adjust the seat position to upright or reclined.
Instructions for removing the seat and changing rocking motion.
How to place the seat onto the swing arm for cradle swing function.
Adjusting seat rotation for side-to-side or head-to-toe swinging.
How to move or remove the mobile, and ensuring correct positioning for electronics.
Instructions for connecting the swing to a wall outlet using the AC adaptor.
Specifies that the AC adaptor should only be plugged into a wall outlet.
Note about the AC adaptor cord's design for accidental disconnection.
Confirms the swing can operate on battery power and refers to installation page.
How to operate the power switch and adjust swing speed settings.
How to control music playback, sounds, and adjust volume levels.
How to turn the mobile light ON and OFF.
Hints on swing activation, music timers, and mobile light operation.
Notes that some product features require the Smart Connect app.
Instructions on how to download the Smart Connect app from app stores.
Information on the app's compatibility with iOS and Android devices.
Steps to pair your device: open app, turn on swing, press pairing button.
Hint for pairing issues and how to confirm connection status in the app.
Navigating app screens and accessing main controls like swing settings.
Using app icons to play music, change songs, and create playlists.
Managing Smart Messages and selecting device display animations.
Connecting/disconnecting device and setting swing/music timers.
Adjusting volume, customizing swing name, and controlling nature sounds.
Adjusting swing speed and controlling the mobile light via the app.
Understanding the app's display of the swing's battery status.
List of Apple and Android devices compatible with the Smart Connect app.
Information on how app compatibility may change with technology updates.
Instructions for cleaning the seat, restraint system, mobile, and frame.
Regularly check for loose parts and tighten as needed.
Folding and storing the swing, including battery removal for long-term storage.
Information regarding compliance with Industry Canada regulations.
States that unauthorized modifications can void user authority to operate equipment.
Confirms device compliance with FCC Rules Part 15.
Links to download the app from the Apple App Store and Google Play.
General| Model Number | DKD85 |
|---|---|
| Category | Baby & Toddler Furniture |
| Color | Multi-color |
| Included Accessories | AC adapter |
| Motion | Side-to-side or head-to-toe |
| Speed Settings | 6 speeds |
| Music | 16 songs and nature sounds |
| Seat Pad | Machine washable |
| Power | AC adapter or batteries |
| Other Features | soft toys |
| Age Range | Newborn |
| Product Dimensions | 36 x 34 x 46 inches |
| Item Weight | 24.9 lbs |
| Material | Plastic, Metal, Fabric |
