EasyManua.ls Logo

Mattel SKY JUMP T7509 - User Manual

Mattel SKY JUMP T7509
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
5+
T7509-0920
CONTENTS •
SKY JUMP™
T7509-0920 HW DOM I/S SIZE:16.5” x 8.5” COLOR: 1C+1C
INSTALL BATTERIES
CONTENTS
© 2010 Mattel, Inc. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer
Relations 1-800-524-8697. • Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628
500303. • Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. •
Mattel East Asia Ltd., Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. •
Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran
Tropicana Golf Country Resort, 47410 PJ. Tel:03-78803817, Fax:03-78803867. service.mattel.com
I=ON/O=OFF
OPERATING TIPS
Open battery cover and insert 4 “D” size alkaline batteries (not included) as shown. For
best performance, use alkaline batteries. Replace the batteries when the booster no
longer propels the car through the set.
BATTERY SAFETY INFORMATION
In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury
or ruin your product. To avoid battery leakage:
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the product before being charged
(if designed to be removable).
• Rechargeable batteries are only to be charged under adult supervision
(if designed to be removable).
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the product.
• The supply terminals are not to be short-circuited.
• Dispose of battery(ies) safely.
• Do not dispose of this product in a fire. The batteries inside may explode or leak.
Protect the environment by not disposing of this product with
household waste [2002/96/EC]. Check your local authority
for recycling advice and facilities.
ASSEMBLY
Adjust track side walls at each
connection point as shown.
TO STABILIZE SET: on carpet, use books.
On smooth floor, tape base to surface.
Turn power switch ON.
NOTE: Refer to molded letters on parts for
easy assembly.
Drop car into cone to launch.
Adjust height of tower
for best performance.
Refer to molded letters on parts
for easy assembly.
INSTRUCTIONS
Please keep these instructions for future reference as they contain important information.
2.
1.
5.
TO PLAY
3.
4.
Hit the loop to release the
trapped car!
Miss and fall back down.
A
A
E
E
C
C
G
G
H
H
D
D
N
N
M
M
L
L
K
K
J
J
I
J
J
I
N
A
H
O
Q
O
P
Q
K
L
M
A
B
D
F
C
C
E
E
G
G
H
M
N
I
Q
P
F
B
D
K
L
O
P
P
Q
O
Q
2
2
1
1
-
-
-
F
F
B
B
I
3
2
Back View
1
+
+
-
+
+
Question and Answer IconNeed help?

Do you have a question about the Mattel SKY JUMP T7509 and is the answer not in the manual?

Summary

Install Batteries and Safety

Battery Safety Information

Critical safety guidelines for battery installation and handling to prevent hazards.

Assembly Steps

Assembly Step 1

Connect various track pieces and ramp sections as shown in diagram 1.

Assembly Step 2

Attach additional track curves and connectors as illustrated in diagram 2.

Assembly Step 3

Integrate the booster mechanism and launch tower components as per diagram 3.

Assembly Step 4

Connect the final track piece and launch ramp, referring to diagram 4.

How to Play

Launching the Car

Turn power on and drop car into the cone to initiate the launch sequence.

Loop Interaction

Hit the loop to release a trapped car or observe misses and falls.

Performance Adjustment

Adjust the height of the tower for optimal performance and car trajectory.

Mattel SKY JUMP T7509 Specifications

General IconGeneral
BrandMattel
ModelSKY JUMP T7509
CategoryGame
LanguageEnglish

Related product manuals