22
MATWELD, INC. PHONE:(270) 444-0085 FAX:(270) 443-6180
Matweld reserves the right to change parts, features, or specifications without notice.
9/99
Name _____________________________________________________
Company___________________________________________________
Serial # of your Matweld tool___________________________________
( Upon receiving your Matweld tool, make sure to list serial number above so that a good record is kept for order
information.)
MATWELD HYDRAULIC TOOL LIST
All Matweld Hydraulic Tools operate at
5 or 10 GPM @ 2000 PSI
18. CUSTOMER INFORMATION
REV.11/06
POWER UNITS:
07000 – HYDRA POWERED MODULAR SYSTEM
02900A – DIESEL POWER UNIT
00100K – DUAL CIRCUIT POWER UNIT
02050 – GASOLINE 1-5 GPM
05500 – TWIN POWER DUAL CIRCUIT UNIT 1-10 GPM OR 2-5 GPM & 5000 WATT GENERATOR
03700A – ELECTRIC POWER UNIT
09800 - TRACK ROVER
TRACK TOOLS:
01600A – 5 GPM 1” IMPACT WRENCH
02500 - 10 GPM 1” IMPACT WRENCH
04500D – ½” IMPACT DRILL
00800A – 16” RAIL SAW
03900A – REVERSING RAIL SAW
01100 A– SPIKE PULLER
08200– TIE TAMPER
08300– SPIKE DRIVER
01500 – RAIL DRILL
01000 – CHAIN SAW
03500 – SELF FEED RAIL DRILL
03100C - RAIL PULLER
02800 - BRIDGE SPREADER
05000- HAND PUMP WELD SHEAR
05100A - POWER WELD SHEAR
06600 - POWER UNIT TRANSPORT CART
07500 - CHAMFER TOOL
OTHER PRODUCTS:
HYDRAULIC MANIFOLDS
HYDRAULIC TEST GAUGES
HOSE REELS
HYDRAULIC HOSES
ACCESSORIES
GRINDERS:
04600 & 04650– STRAIGHT STONE CW & TRIGGER VERSION
04700 & 04750 – STRAIGHT STONE CCW & TRIGGER VERSION
00600 & 00600C - 8” CUPSTONE GRINDER
04800 & 04850 – CUPSTONE & TRIGGER VERSION
00700 – RAIL SURFACING GUIDE
02400 – 10” OR 14” FROG AND SWITCH GRINDER
05900 – FROG/PROFILE GRINDER – ON/OFF FLOW CONTROL
05950 – FROG/PROFILE GRINDER – SAFETY TRIGGER
06000 – PROFILE GRINDER
05400 – ANGLE GRINDER
05600 – BULL NOSE GRINDER
06950 & 06950A - MULTI-PURPOSE GRINDER
To Previous Page
Loading...