7
MATWELD, INC. PHONE:(270) 444-0085 FAX:(270) 443-6180
Matweld reserves the right to change parts, features, or specifications without notice.
08/09
03900A REVERSING RAIL SAW
14. MOST HYDRAULIC OILS HAVE A FLASH POINT OF APPROXIMATELY 450 DEGREES (F). MAKE
SURE HOSES ARE COMPLETELY CLEAR OF SPARKS AND HOT DEBRIS. HAVE ANOTHER
PERSON STAND CLOSE TO HYDRAULIC POWER SOURCE CONTROLS TO OBSERVE OPERA-
TION AND FOR EMERGENCY SHUTDOWN IF NECESSARY
15. IF THE BLADE STOPS DURING THE CUTTING PROCESS DUE TO RAIL BIND OR OTHER PROB-
LEM, IMMEDIATELY TURN OFF THE POWER SOURCE AND DISCONNECT THE HOSES BEFORE
ATTEMPTING TO FREE THE BLADE. AFTER FREEING THE BLADE REPLACE IT WITH A NEW
BLADE BEFORE CONTINUING THE CUT.
To Next Page
Loading...
