6
MATWELD, INC. PHONE:(270) 444-0085 FAX:(270) 443-6180
Matweld reserves the right to change parts, features, or specifications without notice.
08/09
03900A REVERSING RAIL SAW
SAFETY PRECAUTIONS:
1. ALWAYS WEAR PROTECTIVE EQUIPMENT SUCH AS GLOVES, SAFETY GLASSES, EAR PRO-
TECTION AND SAFETY SHOES.
2. DO NOT WEAR CLOTHING WHICH MAY BECOME ENTANGLED IN THE TOOL.
3. ALWAYS KEEP WORK AREA FREE OF TOOLS OR ANY OTHER OBJECTS WHICH MAY IMPAIR
SOUND FOOTING.
4. CAUTION OIL INJECTION HAZARD EXISTS WITH THIS TOOL. OIL INJECTION IS A CONDITION
WHERE THE HYDRAULIC OIL IS FORCED UNDER THE SKIN THROUGH PRESSURE IN THE LINE.
ALWAYS WEAR GLOVES, DO NOT CARRY THE TOOL BY HYDRAULIC HOSES, AND REPAIR
LEAKS IMMEDIATELY.
5. NEVER USE THE RAIL SAW AS A FREE HAND TOOL.
6. NEVER CHANGE BLADES WITH THE POWER SOURCE VALVE(S) IN THE “ON” POSITION, TURN
THE POWER SOURCE “OFF”.
7. NEVER CARRY THE RAIL SAW WITH THE POWER SOURCE IN THE “ON” POSITION, TURN THE
POWER SOURCE “OFF”.
8. NEVER TOUCH OR TRY TO STOP A MOVING BLADE.
9. ALWAYS CHECK THE WORK AREA FOR ANY TRASH WHICH MAY IGNITE FROM SPARKS.
10. ALWAYS CHECK THE AREA FOR SMOLDERING TIES OR TRASH BEFORE LEAVING THE SITE.
11. ALWAYS KEEP A FIRM GRASP ON THE SAW, WITH BOTH HANDS, AT ALL TIMES.
12. WHEN CHANGING BLADES, FOLLOW ALL BLADE MANUFACTURERS INSTRUCTIONS FOR
SAFETY AND OPERATION. USE ONLY BLADES THAT COMPLY WITH ANSI STANDARDS. BEFORE
USING, RUN NEW SAW BLADE FOR ONE MINUTE AT FULL SPEED TO CHECK FOR DEFECTS OR
VIBRATION.
13. NEVER LET THE SAW BLADE CUT INTO ANY MATERIAL (TIE, BALLAST, ETC…) OTHER THAN THE
RAIL BEING CUT.
To Next Page
Loading...
