7
MATWELD, INC. PHONE:(270) 444-0085 FAX:(270) 443-6180
Matweld reserves the right to change parts, features, or specifications without notice.
06/00
05400 RIGHT ANGLE GRINDER
FLOW: 10 GPM (38 LPM)
PRESSURE: 2000 PSI (140 BAR)
MAX BACK PRESSURE: 150 PSI (17 BAR)
ROTATION: COUNTER-CLOCKWISE
RPM: 3800
OPERATION:
1. CONNECT THE HOSES TO THE POWER SOURCE BEFORE TURNING THE POWER
SOURCE “ON”. DO NOT DRAG THE SERVICE HOSES BY PULLING WITH THE TOOL.
LOOP THE SERVICE HOSES IN THE WORK AREA IN SUCH A WAY TO RELIEVE
STRESS ON THE HOSES AND QUICK DISCONNECT FITTINGS WHILE WORKING.
BE AWARE OF HOSE LOCATION AT ALL TIMES.
2. CONNECT THE TOOL TO THE POWER SOURCE.
3. TURN THE POWER SOURCE ON TO SUPPLY 10 GPM TO THE TOOL.
4. GRASP THE TOOL FIRMLY BEFORE DISENGAGING THE TRIGGER SAFETY LOCK.
THERE WILL BE A SLIGHT TORQUE REACTION WHEN THE TRIGGER IS ENGAGED
AND THE STONE IS ACTIVATED.
REV.8/04
To Next Page
Loading...