Matweld 05400 - Changing Stones; Adjusting Angle of Grinding Head

9
MATWELD, INC. PHONE:(270) 444-0085 FAX:(270) 443-6180
Matweld reserves the right to change parts, features, or specifications without notice.
06/00
05400 RIGHT ANGLE GRINDER
CHANGING STONES:
1.) TURN THE POWER SOURCE “OFF” AND DISCONNECT HOSES FROM THE TOOL.
2.) WHILE FACING GRINDING DISK, TURN COUNTER CLOCKWISE, WHILE HOLDING BACK-
ING FLANGE WITH SPANNER WRENCH PROVIDED.
ADJUSTING ANGLE OF GRINDING HEAD:
1.) TURN POWER SOURCE “OFF” WHEN MAKING ADJUSTMENTS TO ANGLE OF THE GRIND-
ING HEAD.
2.) LOOSEN THE 2 JAM NUTS ON THE BOTTOM OF THE GRINDING BODY. BACK THE BOLTS
OFF HALF A TURN.
3.) TURN THE GRINDING HEAD BY HAND TO THE DESIRED POSITION AND RETIGHTEN BOLTS
AND JAM NUTS.
REV.8/04