Mauell ME 3011b User Manual

Manual ME3011b_E_v0707_Pre.doc 1/50
ME 3011b
Instruction Manual
Alarm Systems
SERIAL PRODUCTS
Di
g
ital Alarm Annunciator

Mauell ME 3011b Specifications

General

Brand	Mauell
Model	ME 3011b
Category	Control Systems
Language	English

Summary

INSTALLATION

TECHNICAL DATA

1 - Supply Voltage

Details power supply specifications and options.

2 - Inputs

Describes alarm inputs, isolation, voltage, current, and filters.

3 - Outputs

Lists relay outputs, sound indication, and repeater relay options.

4 - Interfaces

MODULARITY AND ARRANGEMENTS

DIMENSIONS

PANEL MOUNTING

PRODUCT IDENTIFICATION

1.1 Code

1.2 Serial#

1.4 Power Supply

Explains the power supply voltage specifications and options.

SIGNALING SEQUENCES

PRODUCT DESCRIPTION - CM-0x MODULES

1 - CM-0x - "Central Module" - Master CPU Module with 4 alarm points

Describes the Master CPU module's function and capabilities.

CM-03 - Central Module with arrangement 2v x 4h

CM-04 - Central Module with arrangement 4v x 2h

CM-03 and CM-04 Module Connector Identification

Identifies connectors and terminals for CM-03 and CM-04 modules.

KEYBOARD FUNCTION DESCRIPTION

1.1 Horn/Buzzer Acknowledge (HA)

1.2 - Light Acknowledge (LA)

1.3 - Reset (RE)

1.4 - Light Test (LT)

1.5 - Functional Test (FT)

1.9 - PSFD

Details Power Supply Fail Detector (PSFD) indications.

GENERAL FUNCTION DESCRIPTION

2.1 Sound Signal

2.2 Alarm Group

Explains how to group alarms for visualization and control.

2.4 - Input Temporization

INSTALLATION - ANNUNCIATOR POWER SUPPLY

1- ME3011b power supply

1.1 - Annunciator standard supply voltage is 24 Vdc

Details the standard 24 Vdc power supply connection.

2 - Redundant voltage supply with 19 to 264 Vdc and/or 90 to 264 Vac

Explains redundant power supply options.

2.1 Vac power supply

2.2 Vdc power supply

INSTALLATION - INPUTS

1 - Field Inputs

Describes how to connect field signal inputs.

2 - Remote Push-Button Station

3 - GPS synchronization (Option)

INSTALLATION - OUTPUTS

3 - Field Voltage Supply 24 Vdc

4 - External Buzzer

5 - Programmable relays outputs

6 - Repeater Relays output (Option)

7 - Repeater relays for power fault detection (Option)

Explains repeater relays for power fault detection.

8 - Flashing Synchronization Option

CONNECTION DIAGRAM EXAMPLES

1-Standard, Front view

Shows standard front view connection diagrams.

2 -Standard, rear view

Shows standard rear view connection diagrams.

2 Connection diagram with RRO and power fault indication, Vdc at alarm point 2 or yellow led on the keyboard end/or Vac fault at alarm point 4 or orange led on the keyboard

Illustrates diagrams with RRO and power fault indications.

TERMINAL IDENTIFICATION FOR ENCLOSURES WITH CM-03 MODULE - REAR VIEW

TERMINAL IDENTIFICATION FOR ENCLOSURES WITH CM-03 MODULE - FRONT VIEW

TERMINAL IDENTIFICATION FOR ENCLOSURES WITH CM-04 MODULE - REAR VIEW

TERMINAL IDENTIFICATION FOR ENCLOSURES WITH CM-04 MODULE -FRONT VIEW

CONFIGURATION MODES

1- Via Serial Interface

Describes configuration using a serial interface and software.

3 - Via KEYBOARD

Describes configuration using the device's keyboard.