Need help?Do you have a question about the MAULE Jetasen M-4 and is the answer not in the manual?
Provides a general overview of the aircraft's type, engine, and construction.
Lists key technical specifications like wing span, weight, and dimensions.
Details required fluid types and capacities for various aircraft systems.
Instructions for cleaning and maintaining the aircraft's exterior and interior.
Outlines required inspections at different flight hour intervals.
Details construction and materials of the aircraft wings.
Inspection and maintenance of lift struts, including damage repair.
Describes the fuselage structure, materials, and replacement practices.
Maintenance of control surfaces like ailerons, elevators, and rudder.
Procedures for inspecting and maintaining the landing gear system.
Lubrication and adjustment of the Maule tailwheel assembly.
Overview of the aircraft's power plant system.
Details on fuel tanks, lines, and selector valve.
Overview of the aircraft's electrical system.
Diagram of the aircraft's 14-volt electrical system.
Procedures for leveling the aircraft laterally and longitudinally.
Method for checking and adjusting the wing dihedral angle.
Procedure for adjusting wing washout.
Steps for leveling stabilizers and checking vertical stabilizer plumbness.
Adjusting ailerons for streamline position and checking travel.
Adjusting flap cable tension and ensuring proper extension.
Checking rudder travel and adjustment methods.
Checking elevator control movements and stops.
Adjusting elevator trim tab movement and cable tension.
Describes rudder tab function and adjustment.
Specifies grease for main wheel bearings.
Details oil requirements for oleo shock struts.
Lubrication for landing gear hinges.
Lubrication for control column components.
Lubrication for pulley bearings and control surface hinges.
Lubrication for flap mechanisms.
Lubrication for aileron and flap hinges.
Lubrication for elevator and trim tab components.
Lubrication for tailwheel bearings.
Step-by-step instructions for repairing fabric damage.
Method for shrinking repaired fabric areas using an iron.
General precautions for fabric repairs.
To Next Page
General
