Mavea PURITY C - Technical Data; PURITY C Quell ST Specifications

13
9 Technical Data
9.1 PURITY C Quell ST
PURITY C Filter System with Filter Cartridge
PURITY C50
Quell ST
PURITY C150
Quell ST
PURITY C300
Quell ST
PURITY C500
Quell ST
PURITY C1100
Quell ST
Operating pressure 2 bar – max. 8.6 bar (29 psi – max. 125 psi)
Water intake temperature 4°C – 30°C (39.2°F – 86°F)
Ambient
temperature
during
operation 4°C – 40°C (39.2°F – 104°F)
Storage/transport
–20°C – 50°C (–4°F – 122°F)
Flow rate with 1 bar pressure loss
(14.5 psi)
160 l/h
(42.27 US
gallons/h)
145 l/h
(38.30 US
gallons/h)
140 l/h
(36.99 US
gallons/h)
140 l/h
(36.99 US
gallons/h)
150 l/h
(39.63 US
gallons/h)
Nominal fl ow 60 l/h
(15.85 US
gallons/h)
60 l/h
(15.85 US
gallons/h)
60 l/h
(15.85 US
gallons/h)
100 l/h
(26.41 US
gallons/h)
100 l/h
(26.42 US
gallons/h)
Pressure loss at nominal fl ow 0.25 bar (3.6 psi) 0.25 bar (3.6 psi) 0.25 bar (3.6 psi) 0.5 bar (7.3 psi) 0.5 bar (7.3 psi)
Empty fi lter cartridge volume 1.0 l
(0.26 US gallons)
1.9 l
(0.5 US gallons)
2.9 l
(0.8 US gallons)
5.4 l
(1.4 US gallons)
8.7 l
(2.3 US gallons)
Weight (dry/wet) 1.0/1.4 kg
(2.2/3.1 lb)
1.7/2.5 kg
(3.7/5.5 lb)
2.7/3.9 kg
(6.0/8.6 lb)
4.6kg/7.1 kg
(10.1/15.7 lb)
7.7 kg/12.5 kg
(16.9/27.5 lb)
Dimensions of fi lter system
(fi lter head with fi lter cartridge)
(Width/Depth/Height)
119/108/265 mm
(4.69/4.25/
10.43 inch)
117/104/417 mm
(4.60/4.09/
16.42 inch)
125/119/464 mm
(4.92/4.69/18.26
inch)
149/149/553 mm
(5.86/5.86/
21.77 inch)
184/184/553 mm
(7.24/7.24/
21.78 inch)
Dimensions (fi lter cartridge)
with protective cap
(Width/Depth/Height)
108/108/259 mm
(4.25/4.25/
10.19 inch)
104/104/410 mm
(4.09 /4.09/
16.14 inch)
119/119 / 457 mm
(4.68/4.68/
17.99 inch)
149/149/546 mm
(5.86/5.86/
21.49 inch)
184/184/546 mm
(7.24/7.24/
21.49 inch)
Installed dimensions (vertical
installation with wall mounting)
(Width/Depth/Height)
137/130/265 mm
(5.39/5.11/
10.43 inch)
137/128/417 mm
(5.39/5.04/
16.42 inch)
137/136/464 mm
(5.39/5.35/
18.27 inch)
149/151/553 mm
5.86/5.94/
21.78 inch
–
In addition to the accessories, the bending radii of the intake and outlet hose must be considered in addition to the dimensions of
the complete system, depending on the installation orientation.
Operating position Horizontal or vertical
Inlet connection G3/8"–3/8" 18 NPT
Outlet connection G3/8"–3/8" 18 NPT
System tested and certifi ed by NSF International against
NSF/ANSI standard 42 for the reduction of chlorine taste and odour,
and against CSA B483.1.
The PURITY C water fi lter system is used to remove carbonate hardness (temporary hardness/
alkalinity)* from drinking water to prevent limescale deposits in downstream appliances. Do not
use with water that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system. Use cold water only. All of the materials used are safe for contact with
drinking water. Observe relevant regulations. Read the manual prior to use.
* Not performance tested or certified by NSF.