Maverick GALAXY - Assembly Continued

11. Assemble the wall frame supports and place them into
the corresponding sleeves around the walls INSIDE the tent
12. Back OUTSIDE the tent, unbundle the guy lines
13. Locate the straps for the guy lines and loop the guy lines
through them (they follow the seams of the tent)
5
7. Take the main tent strut,
extend it, drop the poles into
place
8. Open the main door and
find the center of the tent,
inside the center of the
sunshade
9. Now raise the roof - strut
end with loops will go up
10. The main strut will hold
itself in the upright position,
without support, when on
relatively level ground
ASSEMBLY
Continued