What to do if my Maverick ion Motorized Toy Car does not follow driving inputs?
If your Maverick Motorized Toy Car isn't responding to your commands, first ensure that both the transmitter and receiver are powered on. Then, verify that the transmitter reverse switches are correctly set. Also, check the EPA Dials on your transmitter. Finally, replace the batteries in the transmitter and recharge the main battery.
General| Scale | 1/10 |
|---|---|
| Drive | 4WD |
| Motor | Brushed |
| Battery | NiMH |
| Radio System | 2.4GHz |
| Power Source | Electric |
| Battery Voltage | 7.2V |
| Drive Type | 4WD |
| Suspension | Independent |
| Motor Type | Brushed |
| Battery Type | NiMH |
| Chassis Material | Plastic |
| Terrain | All Terrain |
Crucial safety guidelines and warnings for operating the RC vehicle.
Recommended tools and items required for vehicle operation.
Procedures for charging the battery pack and installing it in the vehicle.
Correct sequence for turning the vehicle and transmitter on and off.
Details on transmitter features, switches, and controls.
Explanation of throttle, steering, dual rates, and reverse switch.
Adjusting steering trim and binding the transmitter to the receiver.
Steps to configure the electronic speed controller for operation.
Tips for safe and effective driving, including environmental considerations.
Procedures for cleaning and inspecting the vehicle after use.
Identifies common problems and provides remedies for them.
Comprehensive list of standard replacement parts.
List of available upgrade and accessory parts.
Visual breakdown of vehicle components for assembly and repair.
To Next Page
