2 3
REGISTER YOUR
MAVERICK BLIND:
maverickhunting.com/blind-warranty-registration
MAVERICK BLINDS
ASSEMBLY VIDEO
maverickhunting.com/set-up-assembly
LOVE YOUR MAVERICK?
Tips to ensure your Maverick Blind is around for a long time:
+ Store the blind standing up to prevent warping.
+ Protect your blind from the wind by staking it in the ground or bolting it to a platform
through the flange.
+ When operating a firearm from inside the blind, be sure the barrel is outside the
window for your safety and protection.
All Maverick® blinds are warranted to be free from manufacturing and workmanship
defects for as long as the original owner owns the product up to 10 years from the
original date of purchase. This warranty does not include hardware or windows, only
the blind itself.
Warranted blinds will be repaired or replaced, at Maverick® Hunting’s discretion.
Shipping charges may apply.
Failures due to misuse, abuse, normal wear and tear, and/or improper installation
& storage are not covered by this warranty. In addition, failures due to storms, high
winds, floods or other acts of God are not covered by this warranty. Maverick®
Hunting shall not be responsible for any incidental or consequential damages.
Blinds must be registered in order to be covered by the 10-year limited warranty.
Proof of purchase will be required when registering your blind(s).
Follow us on social media at @MaverickHunting, post your blind set up,
submit your story, and leave us a review on MaverickHunting.com
Questions?
Contact support@maverickhunting.com or give us a call at 920-965-8397.
Our team is always here and happy to help you with any questions you may have.
Tools required for assembly:
+ Drill and ¼” drill bit
+ 5/16” and 7/16” sockets/wrenches
+ Phillips head screwdriver
+ Hunting saw or utility knife
Optional tools:
+ Quick-grip or vice grip clamps – to hold pieces together while drilling.
+ 7/16” wrench
PRO TIP: Install your windows and window hardware before taking your
blind into the field to avoid losing small hardware
Your Maverick Blind Kit Includes:
Part 5-Shooter GX 6-Shooter XL
Half Shell with Door 1 1 1
Half Shell with Windows 1 1 1
Horizontal Plexiglass Windows 5 (22” x 10”) 0 0
Vertical Plexiglass Windows 1 (11” x 19”) 6 (11” x 19”) 6 (11” x 19”)
Window Hinge Kit
(hinges, screws, nuts)
1 1 1
Window Clip Kit
(clips, screws)
1 1 1
Door Latch Kit
(latches, keepers, screws, nuts)
1 1 1
Door Handle Kit
(handles, bolts, nuts)
1 1 1
¼” x 1” Hex Bolt Kit with Nuts 1 1 1
Door Seal 1 1 1
Window Seal 1 1 1
REGISTER YOUR BLIND
SUPPORT
QR
PARTS & PIECES
To Next Page
Loading...