Max 80876 - User Manual

Instruction Manual
&
tsiL straP
330-lb Capacity
Model 80876
Platform Dolly
Read and understand this entire manual before setting-up, in-
stalling, operating, or servicing this product.
SAVE THIS MANUAL
Copyright
c
2018 by Maxx Group, LLC. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Maxx Group, LLC. Due
Tools re-
quired for assembly and maintenance may not be included.

Summary

Product Overview

Important Safety Information

Definition of Symbols

Explains the meaning of safety symbols, including those for eye and hearing protection.

General Safety Instructions

Provides essential safety guidelines for operating the platform dolly safely.

Personal and Work Area Safety

Details user responsibilities regarding personal protective equipment and work environment.

Specifications and Parts

Specifications

Details the maximum weight capacity and platform material of the dolly.

Parts List

Lists all components included with the platform dolly for assembly and replacement.

Operation Instructions

Caster Installation

Guide on installing fixed and swivel casters on the platform dolly.

Handle Operation

Instructions for raising and lowering the handle of the platform dolly.

Safety Warnings

Crucial safety precautions to follow during use, including load limits and proper handling.

Overview

1. Important Safety Information
2. Definition of Symbols
3. Personal and Work Area Safety
4. Unpacking
5. Technical Specifications
6. Parts List
7. Operation
8. Warnings for Use

This document describes the MaxxWorks Model 80876, a 330-lb capacity platform dolly. It serves as an instruction manual and parts list, providing essential information for its setup, operation, and maintenance. The primary function of this device is to facilitate the transport of heavy loads, offering a robust and maneuverable solution for various material handling tasks.

Important Safety Information:

The manual emphasizes safety throughout, utilizing a SAFETY ALERT symbol to highlight potential personal injury hazards. It defines different levels of warnings:

• DANGER: Indicates a hazardous situation that will result in death or injury if not avoided.
• WARNING: Indicates a hazardous situation that could result in death or serious injury if not avoided.
• CAUTION: Indicates a hazardous situation that could result in minor or moderate injury if not avoided.
• NOTICE: Indicates important information that, if not followed, may cause damage to equipment.

Users are instructed to read and understand the entire manual before setting up, installing, operating, or servicing the product. This includes all safety warnings and instructions, which, if not followed, could lead to serious injury or death. The manual should be saved for future reference, along with the product's model number and purchase date written on the cover.

Definition of Symbols:

The manual uses specific symbols to convey safety information:

• An eye protection symbol warns about the risk of eye injury and advises wearing ANSI-approved eye protection.
• A hearing protection symbol warns about the risk of hearing loss and advises wearing hearing protection.

Personal and Work Area Safety:

Several guidelines are provided for personal and work area safety:

• Always wear ANSI-approved safety goggles.
• Always wear hearing protection when working in noisy environments, as prolonged exposure to high-intensity noise can cause hearing loss.
• Use safety equipment such as safety shoes, hard hats, and work gloves, as applicable.
• Dress appropriately: Never wear loose-fitting clothing or jewelry. Contain long hair and keep hair, clothing, and gloves away from moving parts.
• Use common sense: Stay alert and concentrate. Do not work under the influence of alcohol, drugs, or medications.
• Keep the work area clean and well-lighted during assembly and use. Keep spectators and children out of the work area.

Unpacking:

Upon receipt, the shipment should be thoroughly inspected. Any goods that are shorted or damaged should not be accepted until the carrier makes a notation on the freight bill. Hidden loss or damage discovered after receipt should be immediately reported to MAXXHAUL.

Technical Specifications:

• Maximum Weight Capacity: 330 Lbs.
• Platform Material: Steel

Parts List:

The dolly consists of the following parts:

• Fixed Caster: 2 units (Part #1)
• Swivel Caster: 2 units (Part #2)
• M8 x 12 Bolt: 16 units (Part #3)
• M8 Lock Washer: 16 units (Part #4)

Operation:

The assembly and operation of the platform dolly are straightforward:

1. Caster Installation: Install the fixed casters on the front side of the platform and the swivel casters on the handle side. This configuration allows for optimal maneuverability, with the swivel casters providing steering capability.
2. Handle Raising: To raise the handle, pull it up until it locks securely in place. This ensures the handle is stable and ready for use.
3. Handle Folding: To fold the handle flat for storage or transport, press down on the bottom bar to release the lock. This allows the handle to collapse, making the dolly more compact.

Warnings for Use:

• Load Capacity: Do not exceed the 330-lb load capacity. Be aware of dynamic loading, where sudden load movement can briefly create excess load, potentially causing product failure.
• Load Distribution: Load items evenly across the platform to maintain balance and prevent instability.
• Intended Use: Use the dolly only as intended. It is not designed to transport humans or animals.
• Pre-Use Inspection: Inspect the dolly before every use. Do not use it if any parts are loose or damaged.
• Not a Toy: This product is not a toy. Children should not be allowed to play with or near the product.

The MaxxWorks Model 80876 platform dolly is designed for practical and safe material handling, emphasizing user safety and proper operation to ensure its longevity and effectiveness.

Max 80876 Specifications

General

Brand	Max
Model	80876
Category	Outdoor Cart
Language	English