Despite the revered crankset, the pedals
must be installed like regular bikes. Before
installing the pedals control the signs"L"
and "R" on both pedals and crankset arms.
RAY1-X Model: The front suspension fork has
preload adjustment feature.
The preload spring is adjusted for a rider weighing
175 Lbs. (78 kg). It can be adjusted based on your weight.
To adjust remove the handlebar stem. Enter a 6mm
Hex key into the center hole of the fork stem and
apply 5-1 turns clockwise; each turn for any higher
20 pounds and 5-1 turn counterclockwise for any
20 pounds lower rider's weight from 175 Lbs.
WARNING! For a safer
and better ride keep the
air pressure on front tire
%35 of your weight in PSI.
If you weigh 100 pounds
keep the pressure 35 PSI.
If you weigh 200 pounds
keep the pressure 60 PSI.
Don't exceed ٦۰ PSI .
You can adjust the height of your handlebar by sliding the upper
part of the stem up and down inside the main tube.
The best position is when your knees and handlebar have enough
clearance while you are pedaling specially when you do turns.
Tighten the two locking bolts to 95-75 In/Lbs. before riding your bike .
When mounting a water bottle cage don't use long bolts and excessive
force. You can break the water bottle bosses.
Adjust the shifters at a position you can view the gear
shifting windows comfortably. For details of service
information refer to SRAM shifters, DualDrive and brake
levers instruction manuals supplied with your bike.
All Maxarya recumbents must be assembled and adjusted by one of our Authorized Dealers to ensure highest function and safety.
If you have any problem with assembly or adjustments of your bike please contact your Authorized Maxarya Dealer or our technical support for assistance.
The images and charts of this leaflet explain the most important and useful maintenance and service instructions. Please read and follow them carefully.
Using a light and quality oil lubricate both left and right chains regularly.
After a period of time you may need to adjust the tension of the left chain.
With a 5mm Hex keys loosen the two bolts back of the bottom bracket
shell. Using a two pointed spanner slightly twist the inner shell clockwise.
Control the tension and also smooth movement of the chain.
WARNING!
For a safer ride keep the
air pressure on the rear tire
%60 of your weight in PSI.
If you weigh 100 pounds
keep the pressure 60 PSI.
If you weigh 200 pounds
keep the pressure 100 PSI.
Don't exceed 100 PSI .
4
To Next Page
Loading...