8
• Bring the bracelet to the phone, briefly press the SOS button
• The icon will change to .
An SOS call initiated by the FW735 bracelet can only be canceled
by pressing and holding the SOS button on the back of the phone.
Remote phone location.
1. In the MM735 phone, save the telephone number sending
the location request as an ICE contact .
2. Make sure location is turned on i
3. n your MM735:
SETTINGS > GPS LOCATION > PASSWORD (0000) > GPS
REFRESH TIME> ENABLE
4. Send text message: cxwz (small letters).
Within approximately 2 minutes, MM735 will send a reply message
with links to maps and geographical coordinates showing the
location of MM735.
The phone sends the last stored location.
If you receive a reply text message saying "No location "
this means that the MM735 phone has not connected to the GPS
transmitters.
The user of the MM735 telephone who is in the building may not be
located.
After the first startup, it's best to leave your phone next to a window
for at least an hour to establish a GPS connection.
Now you can enjoy easy use of Maxcom MM735 + SOS bracelet.
To Previous Page
Loading...
Need help?
General
