Please unplug power supply, when there is nobody home or the unit will
be in idle for a long time.
LED S creen
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless and dry cloth.
For deep clean, pleas e contact an authorized service center.
Never use water or the spray type detergent to clean the unit.
Never use any other hard or sharp object to replace the touch pen.
Better for the panel lifetime and the display performance, do not display
high brightness
image for long time.
Temperature
Normal oper ating temperature is 0℃~40℃.
DO NOT place the unit near or over a radiator or a he ater.
If your unit is suddenly moved from a cold to a warm place , please
unplug the power cable and do not turn it on at least 2 hours, making
sure the moisture inside the unit is all evaporated.
Humidity
DO NOT expose the unit in rain, or place in high humidity area.
Please keep indoor environment is dry and cool. N ormal operating
humidity is 10%~90%RH.
Ventilation
Please put the unit in a well-ventilated place, so the heating can be
released easily.
To Next Page
Loading...