MBC190H
800-621-2789 MBC190H Rev A Page 9
1.7 Model Identification
Please fill in your model and serial number below for future reference. This will help assist in
prompt service when ordering parts and service from your local Maxim Dealer.
Brush Mower Model No.___________________ Brush Mower Serial No. __________________
Engine Model No.__________________ Engine Serial No. _____________________________
Refer to the image below for location of your serial number plate:
Please complete the Warranty/Product Registration at the time of purchase. You will need to
complete the warranty/product registration form (pg. 37) with your new unit, or you may visit our
website www.maximmfg.com and complete our online product registration form. We require
this information so we can keep you updated with any important information about your Maxim
Brush Cutter and provide you with the best customer service possible.
Contact your local Maxim Dealer for OEM replacement parts or contact our customer service
department for assistance in parts, locating your local servicing dealer and more. Your local dealer
is equipped and trained to handle service and repair for your Brush Cutter.
1.8 Further Assistance
Your dealer and all of us at Maxim want you to be pleased with your Brush Cutter. Should you
require further assistance or have questions regarding your Brush Cutter, please contact your
local dealer where you purchased your Brush Cutter. If you are unable to satisfy your needs by
your local dealer, please contact us at:
Maxim
20195 South Diamond Lake Road, STE 100
Rogers, MN 55374
800-621-2789
www.maximmfg.com
To Next Page
Loading...