Maxim MT50B - User Manual

MAXIM MANUFACTURING CORPORATION
PO BOX 110 • Sebastopol, MS 39359 • www.maximmfg.com
Operator’s Manual
Maxim Chain Drive Tillers
TP50B • MT50B • RMT50B • RMT55H • RMT50IC • RMT60R
WARNING
If incorrectly used this machine can cause severe injury. Those who use and
maintain the machine should be trained in its proper use, warned of its dangers,
and should read the entire manual before attempting to set up, operate, adjust,
or service the machine.

Summary

Operators Manual Maxim Chain Drive Tillers

Critical Safety Warnings

Essential warnings regarding safe operation, potential injury, and hazard awareness.

Safe Operation Guidelines

Comprehensive instructions on training, preparation, and safe operating practices.

Tiller Setup and Assembly

Unpacking and Parts Check

Guide to unpack the tiller and verify all included parts are present.

Assembly Instructions

Step-by-step process for assembling the tiller, including handles and tines.

Final Setup and Fluid Levels

Completing setup with checks on transmission fluid, engine oil, and fuel.

Operating Your Maxim Tiller

Understanding Tiller Controls

Explanation of throttle control and clutch lever functions.

Engine Starting and Stopping

Detailed procedures for safely starting and stopping the tiller's engine.

Tilling Techniques and Transport

Guidance on tilling, drag stake use, and transporting the tiller.

Tiller Adjustments and Maintenance

Tine and Clutch Adjustment Guide

Instructions for adjusting tilling width and clutch for optimal performance.

Routine Maintenance Procedures

Periodic checks, belt replacement, lubrication, and engine maintenance.

Maxim MT50B Specifications

General

Number of Blades	4
Material	Steel
Engine type	Gasoline
Tilling width	500 mm
Gears	1 forward, 1 reverse