Maxima ML-6045BC - Technical Specifications and Packaging; Lift Model Specifications; Packing List Contents; Installation Requirements

5
SPECIFICATIONS
Specifications
Certified Lift Models
Model
ML-4030BC
ML-6045BC
ML-4034BC
ML-6051BC
Lifting Capacity per Column
16,500 lbs. / 7,500 kl.
16,500 lbs. / 7,500 kl.
18,500 lbs. / 8,400 kl.
18,500 lbs. / 8,400 kl.
Column Configuration
Single/ Pair
Single/ Pair
Single/ Pair
Single/ Pair
Four
Four / Six
Four
Four / Six
Maximum Lift Capacity
66,000 lbs. / 30,650 kl.
99,000 lbs. / 44,900 kl.
74,000 lbs. / 33,560 kl.
111,000 lbs. / 50,350 kl.
Maximum Lifting Height
67" / 170 cm.
67" / 170 cm.
67" / 170 cm.
67" / 170 cm.
Lifting Time with Maximum
Load*
95 Seconds
95 Seconds
98 Seconds
98 Seconds
Lowering Time with Maximum
Load-
100 Seconds
100 Seconds
105 Seconds
105 Seconds
Carriage Type
Adjustable
Adjustable
Adjustable
Adjustable
Tire Diameter Sizes
19" - 44" / 43 cm-112
cm.
19" - 44" / 43 cm-112
cm.
19" - 44" / 43 cm-112
cm.
19" - 44" / 43 cm-112
cm.
Power Unit
24 Volt DC Electric Hydraulic
Power Supply
Dual 12 Volt Industrial Grade Deep Cycle Battery
with 120 Volt Battery Charging System per column
Shipping Weight per Column
1605 lbs. / 730 kl.
1606 lbs. / 730 kl.
1700 lbs. / 771 kl.
1701 lbs. / 771 kl.
Shipping Dimensions
49" Length x 47" Width x 89" Height / 125 cm. Length x 119 cm. Width x 226 cm Height
Warranty
Two Years Limited
*Lifting and lowering speeds may vary depending on the weight of the vehicle. Speeds shown are at maximum
weight load.
PACKING LIST
The complete lift is a set of four (4) mobile column lifting units and one (1) parts carton.
1. Each column is a self-contained unit.
2. The parts carton contains:
 Four (4) communication cables.
 Four (4) column top dust covers
 10 sets of bolts and washers to secure top covers.
 Two (2) spare hydraulic fittings.
 Two (2) keys for column door interlock
 Important document packet that includes, Maxima Installation, Operation and
Maintenance Manual, ALI Manual, “Lifting it Right”, Automotive Lift Safety Tips Placard,
ALI “Lifting Points Guide”, ANSI/ALI ALOIM:2008 Safety Requirements for Operation,
Inspection and Maintenance.
 Warranty Statement and Warranty Registration Instructions.
INSTALLATION REQUIREMENTS AND TOOLS / SUPPLIES