Need help?Do you have a question about the Maxima ML-6045BC and is the answer not in the manual?
General| Brand | Maxima |
|---|---|
| Model | ML-6045BC |
| Category | Lifting columns |
| Language | English |
Stresses the importance of reading the manual before operating or installing the lift.
Outlines the duties of owners and employers regarding lift operation and safety.
Lists essential safety precautions to be followed when using the lift.
Specifies suitable locations and environmental conditions for lift installation.
Provides references to ALI standards and label kits for safety.
Details technical specifications for various lift models.
Lists the components included in the lift's packaging.
Specifies the necessary floor conditions and strength for lift installation.
Lists tools and materials needed for lift installation.
Instructions for inspecting the shipment for any freight damages upon arrival.
Steps for safely unpacking the lift components and accessories.
Guides on moving columns, adding oil, and battery charging.
Details on how to charge the lift batteries and indicator lights.
Safety precautions for using extension cords with the battery charger.
Warnings and precautions regarding explosive gases produced by batteries.
Instructions for performing system tests prior to actual vehicle lifting.
Identifies and explains the components of the master control panel.
Details the components and functions of the slave control panel.
Explains the operation of power switches, mode selection, and buttons.
Describes how to use the emergency switch to bypass communication cables.
Illustrates four-column and six-column communication configurations.
Steps for testing individual column operation and safety locks.
Procedures for testing paired or all-column operation and safety locks.
Detailed steps for positioning columns and lifting vehicles.
Outlines daily, monthly, and annual maintenance checks for the lift.
Lists common error codes displayed by the lift's self-diagnostic system.
Advises caution for those not familiar with lift maintenance and service.
Details the procedure for locking out energy sources during service.
Item numbers and corresponding part codes for mechanical components.
Visual breakdown of mechanical components for specific models.
Lists item numbers and corresponding part codes for electrical components.
Visual breakdown of the master control box components.
Visual breakdown of the slave control box components.
Item numbers and corresponding part codes for mechanical components.
To Next Page
