Spangenberg International B.V. – Rendementsweg 24P – 3641 SL Mijdrecht – Holland – T. +31 (0) 297 253969 – F. +31 (0) 297 256445
info@spangenberg.nl – www.spangenberg.nl
• Open the appliance, by using the above security button, which is placed on the right side
of the appliance.
• ATTENTION! Open the appliance completely to make certain it will not slam while
assembling the cutting blades.
• Place the cutting blade and the ejector disk as seen in the above picture. Tighten both
disks firmly
• Close the appliance and make certain that the safety button is tightened firmly.
• Put the plastic food-stick in the right shaft.
• Follow the steps in chapter ‘Operation’.
• ATTENTION! When the appliance exhibits overheating, turn off the appliance and let it
cool down, before you restart it.
Operation
• Control whether the appliance has been assembled in the correct way.
• Control the vegetables and make sure they are defrozen and cut big ingredients into
smaller pieces, so they will fit into the shaft easily.
• Plug the appliance into the main socket.
To Next Page
Loading...