EasyManua.ls Logo

MaximalPower FC999 - Charging Procedures and Times; Product Description and Capabilities; Discharging Ni-Cd Batteries

MaximalPower FC999
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
PRODUCT DESCRIPTION
1This charger can charge 4 kinds of batteries Ni-CdNi-MH, RAM &Alkaline.
Each charging bay functions independently
Charge up to 4 batteries simultaneously.
Note: Batteries must be the same type when charge them together (Ni-CdNi-MH or
alkaline)
Accommodates both AAAAACD and 9V batteries.
Battery type is preselected, therefore only one type (Ni-Cd, Ni-MH, RAM or alkaline
(Ram Setting)) battery can be charged at one time
This charger uses the latest battery charging technology. It uses “Negative Delta V
deletion when charging Ni-Cd &Ni-MH battery first, followed by a quick charge. Once
the battery is fully charged, a constant current trickle charge will keep the battery at
optimum capacity.
2Discharging Ni-Cd only:
Discharge times will very depend on capacity and charge state, typically the process could take
up to one hour, before the charge cycle commences.
During the discharge process the indicator LED will glow amber
3Operation
Please read the following instructions carefully before first use of the Charger.
Connect the AC adaptor to the charger with the DC connector end.
Insert the AC plug into the household power supply and make sure the power supply is

Related product manuals