MAXT230HD USER'S MANUAL
Fte maximal Italia s.r.l.u.
ENGLISH
17
8. Setting the time
To access the menu, press MENU and select [Time]. The menu provides options for adjusting time
settings.
Press Up/Down to select an option and press RIGHT/LEFT to adjust the setting. Press ESC to exit
the menu.
9. Option
To access the menu, press MENU and choose [Option]. The menu offers options to adjust the
menu language, subtitle language, and audio language.
Select an option and press RIGHT/LEFT to adjust the setting.
Press ESC to exit the menu.
10. System setup
To access the menu, press MENU and choose [System]. The menu provides options for adjusting
system settings.
Press THE UP/DOWN BUTTON to select an option and press LEFT/RIGHT to adjust the setting.
Press ESC to exit the menu.
11. USB
To access the menu, press the MENU button and select [USB]. The menu offers options for playing
music and photo files, can support MP3, WMA, JPEG, BMP files. The drive will only support the USB
device with FAT file system and FAT32. It will not support the NTFS file system.
Note:
• We cannot guarantee compatibility (operation and/or power) with all USB storage devices
and we take no responsibility for any data loss that may occur when connected to this drive.
• Some USB devices may not be recognized correctly.
• Even when they are in a supported format, some files may not play or appear depending
on the content.
Channel list export:
Insert a flash drive (U disk) through the USB port. Press and hold on for at least 3 seconds the key
1 of remote control to export the channel list manually created.
Remove the flash drive and insert it in another decoder. Press and hold on for at least 3 secondo
the key 2 of remote control to download the channel list previously saved.
To Next Page
Loading...