4. Wait until glowing coals have developed before adding any additional wood. If
additional wood is required, place wood on top coals. Be careful not to shift
ashes.
5. Using a hook and heat resistant gloves, replace spark guard.
Extinguishing
1. Allow fire to burn itself out.
2. DO NOT use water to extinguish as this is dangerous and can cause damage to
this outdoor fire pit.
CLEANING AND CARE
Inspecting
This outdoor fire pit should be inspected on a regular basis to ensure product safety
and longer product life.
CAUTION: DO NOT attempt to inspect this outdoor fire pit until the fire is
completely out.
1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If damage to any components is detected, DO NOT operate until repairs are
executed.
Cleaning
This outdoor fire pit should be inspected on a regular basis to ensure product safety
and longer product life.
Note: After repeated use, a slight discoloration of the finish may occur.
CAUTION: DO NOT attempt to inspect this outdoor fire pit unitl the fire is
COMPLETELY out.
CAUTION: DO NOT use oven cleaner or abrasive cleaners as they will
damage this product.
CAUTION: DO NOT clean any part of this outdoor fire pit in a self cleaning
oven as it may damage the finish.
1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing
brush.
3. Rinse clean with water.
4. Remove built-up creosote from components with a chimney cleaning product.
Storage
CAUTION: DO NOT move or store this outdoor fire pit until the fire is
completely out.
1. Once the fire is out, coals are cold and outdoor fire pit is cool to the touch,
remove ashes and properly dispose.
2. Store assembled in a location away from children and pets.
To Previous Page
Loading...