Maxkon BBQ Series - User Manual

Assembly Instructions :
FIREPIT WITH STEEL TABLE TOP:JS-FT139T
Part List
Part List
Description
Qty.
Drawings
A
Top Frame
1
B
Leg
4
C
Frame Support Part
4
D1
Small Log Grate
1
D2
BBR Grill
1
E
Fire Bowl
1
F
Mesh Lid
1
G
Lid Ring
1
H
Bolt (M6x8mm）
20
I
Poker
1
J
Allen Wrench
1
L
Ceramic Tile
8
M
Ice Bowl
1
N
Steel Table Top
1
O
Pancake Turner
1
P
Tong
1
Tool required: Allen Wrench (provided)
Assembly Instructions
Estimated Assembly Time: 20 Minutes
DO NOT over tighten hardware!
Step 1: Place parts on a smooth even surface, Attach Legs (B) to Frame Support Part (C)
with Bolts (H) Hand tighten!
Step 2: Attach Top Frame (A) to Legs (B) by using Bolts (H). Tighten all hardware
accordingly with an Allen Wrench (J) (provided) and adjustable wrench until all pieces fit
together securely. Turn the assembled fire pit frame over so that it sits securely (legs
down) on a flat surface.
Step 3: Place Fire Bowl (E) in the center of Top Frame (A) and put Log Grate (D1) and
Rack (D2) in the Fire bowl (E).Mount Lid Ring (G) on the Mesh Lid (F), then place the
assembled Mesh Lid over the Fire bowl (E) and put Ceramic Tiles (L) on the assembled
frame..

Summary

Firepit Assembly Instructions

Step 1: Base Frame Assembly

Attach legs (B) to frame support parts (C) using bolts (H) and hand-tighten.

Step 2: Top Frame Attachment

Attach top frame (A) to legs (B) and tighten all hardware securely with an Allen wrench.

Step 3: Internal Component Placement

Place fire bowl (E), log grate (D1), and lid assembly (F/G) onto the main frame.

Final Assembly and Setup

Step 4: Table Top Installation

Place the steel table top (N) onto the assembled firepit frame.

Step 5: BBQ Grill Addition

Position the BBQ grill (D2) onto the assembled frame for cooking.

Step 6: Cooler;Ice Bowl Placement

Place the ice bowl (M) into the firepit base.

Safety and Warnings

General Safety Precautions

Emphasizes outdoor use only and warns against improper installation, adjustment, or maintenance.

Operating Instructions

Lighting Procedure

Details steps for lighting a fire, including ash amount, kindling, hardwood, and using a spark guard.

Tending the Fire Safely

Guidance on shifting logs, adding wood, and warnings against using flammable liquids.

Fire Extinguishing and Care

Extinguishing the Fire

Instructs to allow fire to burn out and advises against using water.

Cleaning and Maintenance

Covers inspection for damage/rust, cleaning methods with mild detergent, and creosote removal.

Storage Guidelines

Provides instructions for storing the firepit after it has cooled down.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Assembly
5. Operational Modes
6. Lighting Instructions (for Fire Pit/BBQ)
7. Tending the Fire
8. Extinguishing
9. Maintenance Features
10. Inspecting
11. Cleaning
12. Storage

The MAXKON BBQ SERIES FIREPIT WITH STEEL TABLE TOP: JS-FT139T is a versatile outdoor appliance designed for use as a fire pit, BBQ grill, table, and cooler. Its multi-functional design makes it suitable for various outdoor activities, from providing warmth and ambiance to cooking and serving.

Function Description:

This appliance serves four primary functions:

1. Fire Pit: Designed to safely contain a wood-burning fire, providing warmth and a focal point for outdoor gatherings. It includes a fire bowl, log grate, and mesh lid with a lid ring to contain sparks.
2. BBQ Grill: By replacing the steel table top with the provided BBQ grill (D2), the unit transforms into a functional grill for outdoor cooking.
3. Table: When the steel table top (N) is placed on the assembled frame, the unit functions as a stable outdoor table, suitable for holding drinks, food, or other items. It incorporates ceramic tiles (L) for a decorative and functional surface.
4. Cooler: By placing the ice bowl (M) into the fire pit base, the unit can be used as a cooler to keep beverages or food chilled.

Important Technical Specifications:

• Model: JS-FT139T
• Estimated Assembly Time: 20 Minutes
• Components:
  • Top Frame (A): 1 unit
  • Leg (B): 4 units
  • Frame Support Part (C): 4 units
  • Small Log Grate (D1): 1 unit
  • BBQ Grill (D2): 1 unit
  • Fire Bowl (E): 1 unit
  • Mesh Lid (F): 1 unit
  • Lid Ring (G): 1 unit
  • Bolt (M6x8mm) (H): 20 units
  • Poker (I): 1 unit
  • Allen Wrench (J): 1 unit (provided)
  • Ceramic Tile (L): 8 units
  • Ice Bowl (M): 1 unit
  • Steel Table Top (N): 1 unit
  • Pancake Turner (O): 1 unit
  • Tong (P): 1 unit
• Required Tool: Allen Wrench (provided)

Usage Features:

Assembly:

The assembly process is straightforward and estimated to take 20 minutes.

• Step 1: Attach Legs (B) to Frame Support Parts (C) using Bolts (H). Hand-tighten initially.
• Step 2: Attach the Top Frame (A) to the Legs (B) using Bolts (H). Tighten all hardware securely with the provided Allen Wrench (J) and an adjustable wrench. Ensure all pieces fit together securely. Once assembled, turn the frame over so it sits securely on a flat surface with legs down.
• Step 3: Place the Fire Bowl (E) in the center of the Top Frame (A). Insert the Small Log Grate (D1) and BBQ Grill (D2) into the Fire Bowl (E). Mount the Lid Ring (G) onto the Mesh Lid (F), then place the assembled Mesh Lid over the Fire Bowl (E). Finally, place the Ceramic Tiles (L) onto the assembled frame.

Operational Modes:

• Table Mode (Step 4): Place the Steel Table Top (N) onto the assembled fire pit frame. The unit is then ready for use as a table.
• BBQ Mode (Step 5): Place the BBQ Grill (D2) onto the assembled frame. The unit is then ready for cooking.
• Cooler Mode (Step 6): Place the Ice Bowl (M) into the fire pit base. The unit is then ready for use as a cooler.

Lighting Instructions (for Fire Pit/BBQ):

1. Ensure only a small amount of ash is in the bottom of the fire bowl.
2. Place a layer of dry kindling or a natural firestarter onto the center of the grate.
3. Above the kindling, place a layer of dry seasoned hardwood cut to lengths no more than 3/4 the diameter of the bowl.
4. Use a match to light the kindling or firestarter.
5. Once the kindling or firestarter is lit, use the poker (I) and heat-resistant gloves to replace the spark guard (Mesh Lid F).

Tending the Fire:

• Logs may need to be shifted or added for an ideal experience.
• CAUTION: DO NOT place a hot spark guard or hot fire bowl tools onto combustible surfaces (e.g., grass, wooden deck, furniture).
• To tend the fire, use a hook and heat-resistant gloves to carefully remove the spark guard.
• Use a long-handled fire pit tool to shift coals and logs to allow additional airflow.
• DO NOT add gasoline, kerosene, diesel fuel, lighter fluid, or alcohol to relight or enhance an existing fire.
• Wait until glowing coals have developed before adding additional wood. If more wood is needed, place it on top of the coals, being careful not to shift ashes.
• After adding wood, use the hook and heat-resistant gloves to replace the spark guard.

Extinguishing:

1. Allow the fire to burn itself out completely.
2. DO NOT use water to extinguish the fire, as this is dangerous and can damage the outdoor fire pit.

Maintenance Features:

Inspecting:

Regular inspection is crucial for product safety and longevity.

• CAUTION: DO NOT attempt to inspect the fire pit until the fire is completely out.
• Check handles to ensure they are secure.
• Inspect all components for any signs of damage or rust.
• If any damage is detected, DO NOT operate the unit until repairs are executed.

Cleaning:

Regular cleaning helps maintain product safety and extends product life.

• Note: A slight discoloration of the finish may occur after repeated use.
• CAUTION: DO NOT attempt to clean the fire pit until the fire is COMPLETELY out.
• CAUTION: DO NOT use oven cleaner or abrasive cleaners, as they will damage the product.
• CAUTION: DO NOT clean any part of this fire pit in a self-cleaning oven, as it may damage the finish.
• Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
• For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush.
• Rinse clean with water.
• Remove built-up creosote from components using a chimney cleaning product.

Storage:

• CAUTION: DO NOT move or store the fire pit until the fire is completely out.
• Once the fire is out, coals are cold, and the fire pit is cool to the touch, remove ashes and dispose of them properly.
• Store the assembled unit in a location away from children and pets.

Maxkon BBQ Series Specifications

General

Brand	Maxkon
Model	BBQ Series
Category	Outdoor Fireplace
Language	English