Need help?Do you have a question about the Maxlogic ML-221XX series and is the answer not in the manual?
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| Display | LCD |
| Operating Voltage | 24V DC |
| Material | Metal |
| Devices per loop | 127 devices |
| Battery Capacity | 7Ah |
| Humidity Range | ≤95% RH (non-condensing) |
| Sound Output | ≥85dB at 1 meter |
| Certification | EN54 |
Details about the producer, authorized services, and the expected operational life of the device.
Guidelines for safely handling, transporting, and storing the fire alarm control panel.
Warnings regarding operational hazards, electrical safety, and environmental considerations during use.
Recommendations for user-performed maintenance and cleaning operations on the device.
Specifies the mains power supply voltage, frequency, and fuse requirements for the panel.
Details the battery requirements for continuity of operation during mains power failure.
Explains zone circuit functionality, detector capacity, and cable specifications.
Information on the supervised sounder output rating and cable requirements.
Details the auxiliary 24V DC power output for external devices.
Describes the volt-free relay outputs for fire and fault conditions.
Explains the function of the Button Control key for enabling panel operations.
Details the operation of the Silence/Sound Alarm button.
Describes the function of the Silence Buzzer button.
Explains the Lamp Test button's function for testing LEDs and buzzer.
Details how the Reset button returns the panel to normal condition.
Describes the function of the Processor Reset button.
Explains the meaning of various front panel indicators like Power On, General Fault, etc.
Describes the indicator for disablement conditions.
Explains the indicator for sounder output faults.
Details indicators for zonal faults like short circuits and open circuits.
Information on the self-resetting fuse for the sounder output.
Details the self-resetting fuse for battery inputs.
Describes the self-resetting fuse for the auxiliary power supply output.
Information on the glass-type fuse for the mains supply input.
Describes the normal state of the panel indicators.
Explains how the panel behaves and is controlled during a fire alarm.
Describes how the panel indicates and handles fault conditions.
Step-by-step guide for entering and exiting Test Mode on the panel.
Step-by-step guide for entering and exiting Disable Mode for zones.
Details the 8-way relay card providing zonal relay outputs.
Details the 8-way sounder card providing zonal sounder outputs.
Information on the network card for panel connectivity.
Details the memory card for saving event logs.
Information on the combined network and memory card.
To Next Page