MAXOAK Bluetti EB120 - Environmental Considerations; Cold Weather Operation; Frequently Asked Questions; Common User Inquiries

EN-06
Cold Weather
Coldweathercaninuencebatterycapacity.Insub-zerotemperature(<0°C),youmay
be able to discharge the product, but you should not charge it. Otherwise, the battery of
the product would be greatly damaged and the capacity may not even be recovered.
Low temperature charging protection: When the product is charged at a temperature
below0°C,itwillshutoffandstopchargingitselfautomatically.Theproductwillreboot
andstartchargingitselfwhenthetemperaturerisetoabove10°C.
Low temperature discharging protection: If the product is discharged at a temperature
of-20°C,itwillturnoff.Theproductwillrebootandturnonoutputwhenthetemperature
risetoabove-10°C.
FAQ
Q1: How to check charging status?
The battery icon indicates the battery level of this product. The battery level is displayed
in5segments.Whenbatteryisbeingcharged,theiconwouldash.Whenthebatteryis
fullycharged,theiconwouldstopashingandall5segmentswillbelled.
Q2: Can this product be used to charge my electronic devices?
You need to check the power at each output port. For example, the power at AC output
port is provided by the built-in inverter of the product, whose maximum continuous
output power is 1000W. This means that it is only suitable for electronic device whose
requiredpowerisnomorethan1000W.
Intelligent Cooling Control
Cooling fan will start working automatically when the following conditions are met :
1. The load of inverter exceeds 400w.
2. The load of 12V cigarette lighter socket exceeds 80w.
3. The charging power of attached appliances exceeds 100W.
Besides, generator intelligent system will adjust the PV input or AC output
power based on the outer case temperature, to keep the outer case at a touchable
temperature.
Note: Do not use the machine when the cooling tan is broken.
Frequency Setting
When the product is powered on, turn on DC output and keep the AC output turned
off. Press and hold both DC button & AC button to enter setting mode Press AC power
buttontochooseinverterACoutputfrequency.PressandholdbothDCandACpower
buttontoexitfrequencysettingmodeRestartthemachine.