26
3.6 Operation using the optional handheld control with spiral cable
After the platform has been opened via the control panel, the 2-button handheld
control can be used to operate the lifting and lowering functions.
When the platform is open the 3-button handheld control can also be used to operate the
tilt up and tilt down functions.
Be careful not to confuse the control elements for tilt up/tilt down and lift/lower. Incorrect
operation could injure third parties.
Define and observe the danger zone, including for third parties.
WARNING
Crushing or shearing hazard. Observe the specified operating position and comply with
the safety distances from the operating position (see page 27). All moving parts of the
liftgate are crushing and shearing hazards. Define and observe the danger zone,
including for third parties. Make sure that you have a good view of the entire loading area
and that no one is near the platform.
WARNING
Lift
Lower
Lift
Tilt up / tilt down
Lower
To Next Page
Loading...