Maxon M-KIT118 - Tools Required for Assembly; Hardware Kits; Panel Hardware (PL4848); Rectangular Worksurface Hardware (UWR2448 TM)

Page 3 of 11 M-KIT118/119/120 Assembly Instrucons 181-03007
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from
failure to properly assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Tools Required for Assembly
Hardware Kits
Please ensure all required pieces are present before beginning assembly. Some steps may require a second
person for assembly assistance.
Panel Hardware (PL4848)
Rectangular Worksurface Hardware (UWR2448TM)
Phillips Screwdriver
Level
Drill/Screw Gun
with Phillips bit
Boxcuer
Tape Measure
1/2” Box End or
Adjustable Wrench
Wire Cuers
or Snips
End Cap
Provided: 8
Used: 6
Top Cap Spacer
Provided: 8
Used: 2
I-Beam Panel Connector
Provided: 48
Used: 48
#8 x 1/2" Phillips Flat Head
Provided: 16
Used: 0
Straight Alignment Bracket
Provided: 8
Used: 0
Lock Bar
Provided: 8
Used: 0
Provided: 4
Used: 0
Corner Bracket - RH
Provided: 4
Used: 0
Corner Bracket - LH
Provided: 4
Used: 0
#10 x 3/4" Panhead Screw
Provided: 64
Used: 12