Maxon M-KIT118 User Manual

M-KIT118/119/120
Assembly Instructions
Document Number: 181-03007
Revision Date: November 2008
®
Maxon Furniture Inc.
An operang company of the HNI Corporaon
www.maxonfurniture.com
Customer Service 1-800-876-4274
These instrucons must be followed exactly. Failure to
follow these instrucons could damage the product or
result in injury to persons using or assembling the product.
Maxon Furniture Inc. shall not be liable for any costs, loss,
damage, expenses or injuries resulng from failure to
properly assemble the product in accordance with these
instrucons.

Maxon M-KIT118 Specifications

General

Brand	Maxon
Model	M-KIT118
Category	Indoor Furnishing
Language	English

Summary

Tools Required for Assembly

Hardware Kits

Panel Hardware (PL4848)

Details hardware components for panels, including caps, connectors, and brackets.

Rectangular Worksurface Hardware (UWR2448TM)

Lists hardware for attaching worksurfaces, such as brackets and screws.

Corner Post Hardware (PLCP48)

Specifies hardware for corner posts, including caps, connectors, and brackets.

Spanner Rail Hardware (LLSR48)

Details hardware for spanner rails, including clips and screws.

Installing the Panels

Panel Placement and Alignment

Guides positioning, leveling, and connecting panels to form the structure.

Using Alignment Brackets

Details the installation of straight and angle alignment brackets for panel stability.

I-Beam Panel Connectors

Explains the use and trimming of I-Beam connectors for panel connections.

Installing the Raceway Trim

Raceway Cover and End Cap Installation

Covers attaching raceway covers and end caps to the panel assembly.

Installing The Top Trim

Wedge Brackets and Corner Post Caps

Details the installation of wedge brackets and caps onto corner posts.

Top Caps and End Caps

Guides the placement of top caps, spacers, and end caps on panel tops.

Installing the Spanner Rails

Spanner Rail and Clip Installation

Explains how to hook and position spanner rails and clips into panel slots.

Installing the Worksurfaces

Cantilever Bracket Placement

Guides the positioning and attachment of cantilever brackets to panels.

Securing Worksurfaces

Details placing worksurfaces onto brackets and rails.

Final Worksurface Attachment

Covers attaching spanner clips and cantilevers to worksurfaces with screws.