Maxon M-KIT118 - Installing the Spanner Rails; Spanner Rail and Clip Installation

Page 9 of 11 M-KIT118/119/120 Assembly Instrucons 181-03007
These instrucons must be followed exactly. Failure to follow these instrucons could damage the product or result in injury to persons
using or assembling the product. Maxon Furniture Inc. shall not be liable for any costs, loss, damage, expenses or injuries resulng from
failure to properly assemble the product in accordance with these instrucons.
Maxon Furniture Inc. Customer Service: 1-800-876-4274
Installing the Spanner Rails
Unpack the LLSR48 Spanner Rail.1.
Hook the two Spanner Clips onto the top 2.
ange of the LLSR48 Spanner Rail (Figure 10).
Posion the LLSR48 Spanner Rail into the 3.
Panel slots at about 28” from the oor to the
top of the Rail.
With the LLSR48 Spanner Rail lted upward 4.
about 45°, slide the top tooth into the PL4848
Panel slot, then rotate the LLSR48 Spanner
Rail down to engage the other teeth.
Repeat steps 1 - 4 to install the three remaining 5.
LLSR48 Spanner Rails into the outer PL4848
Panels.
Figure 10
28"
Spanner
Rail
Spanner
Rails
(hidden)
Spanner
Clips
Spanner Rail