compression from 1:1 (no compression)
up to
∞
: 1 (no increase in output level,
regardless of input level increases
above threshold). When the RATIO is
∞
: 1, it can be used as a limiter. When
the RATIO is1:1, it can be used as a
clean booster.
⑤GAIN (gain control knob)
Controls output level. When strong
compression is set by THRESHOLD and
RATIO, output level goes down. (Fig. 3)
Turn GAIN control knob clockwise to
have the same volume as Bypass
functions. Output level can be
boosted up to +30dB so that when the
RATIO is1:1, it can be used as a clean
booster.
⑥REDUCTION LED (reduction indicator)
The LED lights when output level is
compressed more than +3dB vs. input
level.
Refer to OD9 pages for ⑦⑧⑨.
⑦FOOTSWITCH
⑧INDICATOR
⑨DC. IN.
THRESHOLD RATIO GAIN
17
ENGLISH
CP9Pro+
●True Bypass Switching with 4PDT lets your instrument’s signal pass through
a non-electronic bypass line when the effect is disengaged, feeding your
amp with direct, unaltered signal from your instrument.
●Easy-access, no tools battery compartment.
To Next Page
Loading...
